Netgear XAV5501-100NAS 사용자 설명서

Adding Adapters to Your Network

Once the first adapter is installed and connected to your router, you can easily add adapters 
into your network. 

Be sure the first Powerline adapter is connected to your router. 

Plug additional Powerline adapters into power outlets near the other computers and 
additional peripheral devices to be included in your Powerline network. 

Use the gray Ethernet cable from the XAV5501 
package to connect from the

 Powerline adapter 

to an Ethernet port located on the other 
computer or peripheral device.

Wait for each Powerline adapter to be 
recognized by the Powerline network. 

The Power, Ethernet, and Powerline LEDs 
should turn on. This could take as little as 5 
seconds, or up to 80 seconds. For details 
about how the LEDs work, see 

Test to make sure that each computer 
connected to a Powerline XAV5501 Adapter can 
access the Powerline network. 

For example, be sure that you can access the 
Internet from a remote computer. 

One way to test this is to install the Powerline 
utility and use it to view all the computers 
connected by the Powerline AV Ethernet adapter. 

NETGEAR recommends that you secure your Powerline network from 
unauthorized access. This is especially relevant in settings such as 
apartment buildings. See