Black Box SW721A(E)-R2 사용자 설명서

QUICK START  

 

Following is a guide to quickly install and operate your ServSwitch.  
Refer to the connection diagram on the following page. 
 

1-  Connect your CPUs to the ServSwitch using an appropriate 

CPU Adapter Cables.  Connect the DB25M end of the CPU 
Adapter Cable to the DB25F connector labeled CPU x on the 
ServSwitch’s rear panel.  Connect the keyboard, mouse, and 
video card connectors to your CPUs keyboard, monitor, and 
mouse ports. 

2-  Connect your KVM station to the ServSwitch using an 

appropriate KVM Adapter Cable.  Connect the DB25M end 
of the KVM Adapter Cable to the DB25F connector labeled 
monitor / keyboard / mouse on the ServSwitch’s rear panel.  
Connect the other end of the KVM Adapter Cable to the 
mouse, keyboard, and monitor cables. 

3-  Connect the power adapter to ServSwitch and a power 

source.   

4-  Turn on ServSwitch 
5-  Turn on the KVM monitor 
6-  Sequentially boot the CPUs starting with CPU #1 

(You should see the boot up sequence on CPU #1 on the 
KVM monitor) 

7-  Press the #2 select button on the front panel and boot CPU 

#2. (You should see CPU #2’s boot up sequence on the 
KVM monitor) 

8-  Press the #3 select button on the front panel and boot CPU 

#3. (You should see CPU #3’s boot up sequence on the 
KVM monitor) 

9-  Press the #4 select button on the front panel and boot CPU 

#4. (You should see CPU #4’s boot up sequence on the 
KVM monitor) 

 
This completes the easy installation process.  Refer to the 
Installation manual for an expanded explanation of the 
installation process and for additional commands.