Bosch 255-w 사용자 설명서

다운로드
페이지 3
CCTV  |  IP Network Video  |  Technical Brief  | NBC 255W and 265W Wireless Connections 
|  1 
 
 
 
 
Bosch Security Systems, Inc. 
800.289.0096 
www.boschsecurity.us 
 
NBC 255-W and 265-W Wireless Connection Guide 
 
Objective: This wireless connection guide is designed to assist with establishing wireless connectivity between typical commercially 
available wireless routers and Bosch NBC 255-W / NBC 265-W cameras.  
 
Minimum prerequisites prior to starting: 
•  The NBC Camera should be assembled as per the directions of the quick installation guide provided with the camera 
o
 
Wireless antenna is attached 
o
 
SD card is installed 
o
 
Power adapter is connected to the camera 
•  Bosch Video Client and Configuration Manager software should be installed on your PC 
•  A physical Ethernet connection to the camera established 
•  Access to an 802.11 B, G, or backwards compatible N wireless router  
o
 
NOTE: If using an 802.11N router, review the manufacturer’s specifications for compatibility with 802.11G products. If 
the router is not backwards compatible it will not communicate with the camera
 
 
Step 1: Assigning an IP address to the NBC Camera 
The first step in establishing wireless communications is to 
assign a static IP address to the NBC camera. Open the 
Configuration Manager application on your PC.  
 
 
 
•  Once the program is opened you should see the 
NBC camera appear in the “Network” column as 
shown. By default all Bosch encoders and network 
cameras come with a factory default IP address of 
192.168.0.1. 
 
 
 
•  Manual Assignment: You can assign an IP address 
manually or by using the Configuration Wizard. We 
will cover the manual method first. Simply right
-
click 
the camera in the “Network” column and the select 
“Device Network Settings…” as shown. 
 
  
 
 
•  Once the “Network settings” menu is open enter valid 
IP address information for the desired network and 
select “OK”. After selecting “OK: the camera will 
reboot.   
o
 
NOTE: Most off-the-shelf home wireless 
routers come preconfigured in a 192.168.1.x 
address range (Private C Class Address). 
For this guide we will use an address of 
192.168.1.200.