Fujitsu V01 사용자 설명서

다운로드
페이지 138
Chapter 1  Before Using This Product 
IP-900 Series 
1.1 
Main Features 
IP-900 series is a video encoder that uses the high compression video encoding technology H.264.  It 
enables real-time streaming of high definition (HD) and standard definition (SD) video through the 
optical fiber networks like FTTH. 
 
The IP-900E can operate as an encoder and the IP-900D/IP-900IID can operate as a decoder.  When 
operating as an encoder, the IP-900E encodes input video and audio signals into the H.264 format and 
distributes the results over an IP network in real-time processing.  When operating as a decoder, the 
IP-900D/IP-900IID decodes encoded data received over an IP network and outputs the results as audio 
and video signals.  In addition, the IP-900E operating as an encoder provides a recorder function (*1), 
which allows HD video data to be transmitted over a longer period of time even when the network 
bandwidth is low. 
IP-900E encoder also features simulcast (dual encoding) capability to distribute two kinds of the 
encoded streams that are produced from a single video input by main and sub encoder of IP-900E in 
real-time. 
 
Table 1-1  IP-900E Specifications 
The main HD video and sub HD video functions become available when the HD option is added. 
Item 
Specification 
Encoding format 
H.264 HP@L4 
H.264 MP@L4 
Input video format  1920 x 1080i (59.94 Hz) 
1920 x 1080i (50 Hz) 
1920 x 1080i (60 Hz) 
1280 x 720p (59.94 Hz) 
1280 x 720p (50 Hz) 
* Video input protection buffer OFF/ON can be specified. 
Bit rate 
1920 x 1080:  4 to 27 Mbps 
1440 x 1080:  4 to 27 Mbps 
960 x 1080:  1 to 27 Mbps 
1280 x 720:  4 to 27 Mbps 
960 x 720:  4 to 27 Mbps 
640 x 720:  1 to 27 Mbps 
Video PES 
“1Field/1PES” / “1Frame/1PES” selectable 
Profile selection 
Either High profile or Main profile can be selected. 
PPS interval 
GOP/Picture selectable 
PPS ID 
Fixed/Adaptive selectable 
Encoding control 
mode 
Standard (IBBP), Low latency (IPPP), or Low latency (PPPP) can be selected. 
Pre-filter 
HEAVY, MEDIUM, LIGHT, or OFF can be selected. 
Refresh cycle 
Selection can be made in three stages. 
Main HD 
video 
 
Interfaces 
Input: HD-SDI and HDMI (HDCP not supported) 
Main SD 
video 
Encoding format 
H.264 HP@L3 
H.264 MP@L3 
1.1