Fujitsu 2.1 사용자 설명서
Chapter 8 Commands
8.12 Copy Set File Registration Command (stxvcopyset)
8.12 Copy Set File Registration Command (stxvcopyset)
ETERNUS VSS Hardware Provider 2.1 User’s Guide
Copyright 2012 FUJITSU LIMITED
P3AM-4582-03ENZ0
74
8.12
Copy Set File Registration Command (stxvcopyset)
This command registers the copy set information of the copy set file that is created by the user to the
copy set management file.
This command should be performed with a production server.
copy set management file.
This command should be performed with a production server.
This command can only be used for a copy set operation.
For more details, refer to "8.3 Copy Set File Registration Command (stxvcopyset)" in "ETERNUS VSS
Hardware Provider 2.1 Copy Set Operation Technical Guide".
For more details, refer to "8.3 Copy Set File Registration Command (stxvcopyset)" in "ETERNUS VSS
Hardware Provider 2.1 Copy Set Operation Technical Guide".
8.13
Copy Set Registration Display Command (stxvcopyprt)
This command outputs the copy set information that is registered in a copy set management file to
standard output.
This command should be performed with a production server.
standard output.
This command should be performed with a production server.
This command can only be used for a copy set operation.
For more details, refer to "8.4 Copy Set Registration Information Display Command (stxvcopyprt)" in
"ETERNUS VSS Hardware Provider 2.1 Copy Set Operation Technical Guide".
For more details, refer to "8.4 Copy Set Registration Information Display Command (stxvcopyprt)" in
"ETERNUS VSS Hardware Provider 2.1 Copy Set Operation Technical Guide".