Canon SX80 사용자 설명서

88

Selecting a Logo at Startup

[User screen settings] - [Projector on]

You can display a specified logo on a 
screen from the moment the projector is 
turned on to the moment it is ready fro pro-
jection.

Press the OK button to accept your setting 
and then press the MENU button.

• [Canon logo] is the factory default.
• [User logo] is available only when a 

user's logo has been registered.

Selecting Aspect Ratio of Screen

[Screen aspect]

You can select proper option corresponding 
to the aspect ratio of the projecting screen.

Press the OK button to accept your setting 
and then press the MENU button.

• [4:3] is the factory default.
• If you select [16:9 D. image shift], the 

keystone adjustment will be reset. For 
more details, refer to the page 

• [Auto] may be automatically selected for 

[Screen aspect] depending on the 
screen aspect setting.

HDMI

COMPONENT

DIGITAL PC

VIDEO/S-VIDEO

ANALOG PC

USB

Skip

Projects an input signal immedi-
ately after turning on the projec-
tor.

Canon logo

Displays the Canon logo cap-
tured at the factory.

User logo

Displays a user logo captured on 
the [Logo capture] screen.

User screen settings 

Display settings

Projector on

HDMI

COMPONENT

DIGITAL PC

VIDEO/S-VIDEO

ANALOG PC

USB

4:3

Select this when you use a screen with 
aspect ratio of 4:3.
You can adjust the keystone distortion 
with D.SHIFT/KEYSTONE button.

16:9

Select this when you use a screen 
with aspect ratio of 16:9.
You can adjust the keystone distortion 
with D.SHIFT/KEYSTONE button.

16:9
D. image 
shift

Select this when you use a screen 
with aspect ratio of 16:9.
You can move the screen upward or 
downward with D.SHIFT/KEYSTONE 
button.

Screen aspect

Display settings