Runco VX-6000D 사용자 설명서
Runco VX-6000d Installation/Operation Manual
39
PRE
L
IMINAR
Y
Connecting 12-volt
Trigger Outputs to
External Equipment
Trigger Outputs to
External Equipment
DHD Controller: If your VX-6000d is equipped with a CineWide with AutoScope system,
connect the AutoScope lens motor to a 12-volt trigger output on the DHD Controller; see
Figure 3-17.
connect the AutoScope lens motor to a 12-volt trigger output on the DHD Controller; see
Figure 3-17.
Similarly connect other 12-volt trigger-activated equipment (such as retractable screens or
screen masks) to the other trigger outputs.
screen masks) to the other trigger outputs.
For more information on using the DHD Controller triggers, refer to Triggers on page 70.
Figure 3-17. 12-volt Trigger Output Connections (from DHD Controller)
Tip = +12V
Sleeve = Ground
AutoScope Lens Motor
3.5-mm
mini plug
mini plug
AC Input
Power
Switch
Retractable Screen or other
12-volt trigger-activated
device
12-volt trigger-activated
device