Runco VX-6000D 사용자 설명서

Front Panel Brightness: Select Front Panel Brightness from the Service menu to adjust 
the brightness of the front-panel LED and LCD status indicators.

 

 

• Logo LED: Select Logo LED from the Front Panel Brightness menu to adjust the 

brightness of the large, illuminated logo on the left side of the display. The range is from 
0 (off) to 31. 

• Standby LED: Select Standby LED from the Front Panel Brightness menu to change 

the behavior of the front-panel STANDBY indicator LED. When set to ON, the LED 
lights amber when the system is in standby mode; otherwise, it is off. When set to OFF, 
the LED is always off. 

• LCD: Select LCD from the Front Panel Brightness menu to adjust the brightness of the 

front-panel LCD. The range is from 0 (off) to 4. 

System Reset: To reset ALL controller settings (including image settings) back to their 
factory defaults, choose System Reset from the Service menu. 

A confirmation message appears. Select Yes to continue with the reset or select No to 
cancel. 

 

 

This action is not undoable. Proceed with caution! Before you 
perform a System Reset, save your “Custom” Memory Presets 
(page 63) and ISF Day/Night Memory Presets (page 67).

Logo LED

LCD

Standby LED