Sanyo PLC-WXE45 사용자 가이드

Exit the Image Adjust Menu.

To  store  the  adjusted  data,  select  “Store”  and  press  the

SELECT  button. The  Image  Level  Menu  appears.  Use  the

Point

▲▼

buttons to choose one of the four image level and

press the SELECT button. A confirmation box appears and

then select “Yes.”

The stored data can be called up by selecting “Image” in the

Image Level Selection on page 30.

Move the red frame

pointer to the desired

image level (from Image

1 to 4) and then press

the SELECT button.

A confirmation

box appears,

then select “Yes.”

Store item

Press the SELECT button

at this item to store the

adjusted data.

This projector has the picture screen resize function, which enables you to customize the image size.

Press the MENU button to display the On-Screen

Menu. Use the Point

◄►

buttons to move the red

frame pointer to the Screen Menu icon.

Move the red frame pointer

to the function and press

the SELECT button.

Use the Point

▲▼

buttons and move the red frame

pointer to the desired function and then press the

SELECT button.

Screen Menu icon

Provide the image to fit the screen size while maintaining

the aspect ratio of input signal.

Provide the image in its original size. When the original

image size is larger than the screen size (1280 x 800), the

projector automatically switches to the panning mode. Use

the Point

◄► ▲▼

buttons to pan the image. When adjusted,

the arrows turn red. When reached to the correction limit,

the arrows disappear.

Provide the full screen image.

Note:
• This projector cannot display any