Sanyo PLC-WXE45 사용자 가이드

When moving the projector, replace the lens cover and

retract the adjustable feet to prevent damage to the lens

and  cabinet.    When  the  projector  is  not  in  use  for  an

extended period, put it into a suitable case.

Handle  the  projector  carefully;  do  not  drop,  bump,

subject  it  to  strong  forces,  or  put  other  things  on  the

cabinet.

Do not roll the projector more than

20 degrees from side to side.

Do  not  point  the  projector  up  to

project an image.

Do not point the projector down to

project an image.

Do not put the projector on either

side to project an image.

Install  the  projector  properly.  Improper  Installation  may

reduce the lamp life and cause fire hazard.

Openings in the cabinet are provided for ventilation. To

ensure reliable operation of the product and to protect it

from  overheating,  these  openings  must  not  be  blocked

or covered.

Air Intake

Vent

Exhaust Vent

(Hot air exhaust)

Exhaust Vent

(Hot air exhaust)

Air Intake

Vent

Hot  air  is  exhausted  from  the  exhaust  vent.  When

using  or  installing  the  projector,  the  following

precautions should be taken.

–   Do  not  put  any  flammable  objects  or  spray  can

near the projector. Hot air is exhausted from the air

vents.

–   Keep the exhaust vent at least 3’ (1 m) away from

any objects.

–   Do not touch a peripheral part of the exhaust vent,

especially  screws  and  metallic  part. This  area  will

become hot while the projector is being used.

–   Do not put anything on the projector. Objects put on

the cabinet will not only get damaged but also may

cause fire hazard by heat.

Cooling fans are provided to cool down the projector.

The fan’s running speed is changed according to the

temperature inside the projector.

–   Do  not  drop  or  bump  the  projector,  otherwise

damages or malfunctions may result.

–   When carrying the projector, use a suitable carrying

case.

–   Do not transport the projector by courier or any other

transport service in an unsuitable transport case. This

may cause damage to the projector. For information

about  transporting  the  projector  by  courier  or  any

other transport service, consult your dealer.

–   Do not put the projector in a case before it is cooled

enough.

Do  not  pitch  the  projector  more

than  20  degrees  backward  and

forward.

Choose the running speed of cooling fans in the fan

control setting according to the altitude in which the

projector  is  being  used  (p.49).  Failure  to  do  so  may

affect the projector life.