Sanyo PLC-WXE45 사용자 가이드

(MONO)

(VARIABLE)

①

②

③

④

⑤

⑥

⑧

⑦

⑤ 

Connect the S-VIDEO output from video equipment

to this jack (p.15).

⑥

 AUDIO IN

Connect the audio output from video equipment
connected to

⑤

or

⑨

to this jack. [When the audio

output is monaural, connect it to L (MONO) jack

(p.15).

⑧ 

Connect the audio output (stereo) from a computer
or video equipment connected to

①

or

④

to this

jack (pp.14, 16).

⑨

 VIDEO IN

Connect the composite video output from video

equipment to VIDEO jack (p.15).

④

 COMPUTER IN /MONITOR OUT

This terminal is switchable and can be used

for input from a computer or output to the other

monitor.

Set the terminal up as either Computer input or

Monitor output properly. [Used for Monitor out,

this terminal outputs only incoming signal from

COMPUTER IN 1/COMPONENT IN terminal (pp.

14, 44)].

⑦

 AUDIO OUT (VARIABLE)

Connect an external audio amplifier to this jack

(pp.14 - 16).

This terminal outputs sound from AUDIO IN
terminal (

⑥

or

⑧

).

②

 SERVICE PORT

When  controlling  the  projector  from  a  computer,

connect  the  computer  to  this  connector  with  a

control cable.

① 

Connect output signal from a computer, RGB scart

21-pin video output, or component video output to

this terminal (pp.14, 16).

When the cable is of the longer variety, it is

advisable to use this terminal and not COMPUTER

IN 2/MONITOR OUT.

⑨

③

 LAN Connection Terminal 

Connect the LAN cable (Refer to the owner's

manual of "Network Set-up and Operation".).