Sony VPL-HS10 사용자 설명서

GB 

52

Troubleshooting

The LAMP/COVER or TEMP/FAN indicator on the 
control panel lights up or flashes if there is any trouble 
with your projector.

Use the list below to check the meaning of the 
messages displayed on the screen.

Use the list below to check the meaning of the 
messages displayed on the screen.

Use the list below to check the meaning of the 
messages.

A still picture in the 
“Memory Stick” 
cannot be rotated or 
deleted.

c Release the lock for the write-

protect tab on the “Memory 
Stick”. (

c Release the protect in the index 

screen. (

The “Memory Stick” 
cannot be formatted.

c Release the lock for the write-

protect tab on the “Memory 
Stick”. (

c The “Memory stick” is broken. 

Use another “Memory Stick”.

The thumbnails are not 
displayed.

c The pictures are the JPEG 

format but not DCF-compatible. 
Use the DCF-compatible 
pictures.

The still pictures files 
in the JPEG format 
stored in a “Memory 
Stick” cannot be 
displayed.

c Set “Filter” in the “Option” 

menu to “Still” or “Off.”

The movie picture files 
in the MPEG1 format 
stored in a “Memory 
Stick” cannot be 
displayed.

c Set “Filter” in the “Option” 

menu to “Movie” or “Off.”

LAMP/COVER 
flashes.

c Attach the lamp cover or the air filter 

cover securely. (

1 pages 53 and 54)

LAMP/COVER 
lights up.

c The lamp has reached the end of its 

life. Replace the lamp. (

c The lamp becomes a high temperature. 

Wait for one minute to cool down the 
lamp and turn on the power again. (

TEMP/FAN 
flashes.

c The fan is broken. Consult with 

qualified Sony personnel.

TEMP/FAN 
lights up.

c The internal temperature is unusually 

high. Check to see if nothing is 
blocking the ventilation holes.

LAMP/COVER 
and TEMP/FAN 
light up.

c The electrical system breaks down. 

Consult with qualified Sony 
personnel.

High temp.! 
Lamp off in 1 
min.

c Turn off the power.
c Check to see if nothing is blocking the 

ventilation holes.

Frequency is 
out of range!

c Input a signal that is within the 

acceptable range of the frequency.

c Set the output signal on an external 

monitor of the connected computer to 
SVGA.

Please check 
Input-A Signal 
Sel.

c Set “Input-A Signal Sel.” in the SET 

SETTING 

 menu to “Computer” 

when RGB signal is input from the 
computer. (

Please check 
Digital Signal 
Sel.

c Set “Digital Signal Sel.” in the SET 

SETTING 

 menu to “Computer” 

when RGB signal is input from the 
computer.(

Before you change the “Digital Signal Sel.” 
setting, disconnect the DVI cable and turn off the 
digital tuner, etc.

Please replace 
the LAMP.

c It is time to replace the lamp. Replace 

the lamp. (

Please replace 
the filter.

c It is time to replace the air filter. Replace 

the air filter. (

NO INPUT

c No signal is input. Check connections. 

Not applicable!

c Press the appropriate button.

No Memory 
Stick

c Insert the “Memory Stick” into the 

“Memory Stick” slot correctly.

No file

c No picture files are contained in the 

currently selected folder.

No movie file

c No movie picture files are contained in 

the currently selected folder although 
“Filter” is set to “Movie” in the 
“Option” menu.

No still file

c No still picture files are contained in the 

currently selected folder although 
“Filter” is set to “Still” in the “Option” 
menu.