Sony VPL-CX125 사용자 설명서
6
Preparation
3
Install the software according to the
“wizard” within the installer.
“wizard” within the installer.
When you use Windows XP Service
Pack 2/Vista and the following dialog
box appears during installation, check
the [Register automatically] radio button
and click [Next].
Pack 2/Vista and the following dialog
box appears during installation, check
the [Register automatically] radio button
and click [Next].
The [Autoconfiguration done] appears
after the installation is completed.
after the installation is completed.
4
To go on projecting the pictures, check
the [Start Air Shot v2 and connect to
Projector] check box and click [OK].
the [Start Air Shot v2 and connect to
Projector] check box and click [OK].
With the check, the Projector Station for
Air Shot Version 2 starts up
automatically.
Air Shot Version 2 starts up
automatically.
When you are not going to project the
pictures, click [OK].
pictures, click [OK].
Starting from the hard disk or
external memory without installing
Projector Station for Air Shot
Version 2 into the computer
external memory without installing
Projector Station for Air Shot
Version 2 into the computer
1
Install the external memory (“Memory
Stick”, USB memory, etc.) into the
computer.
It is not necessary to copy it to the hard
disk.
Stick”, USB memory, etc.) into the
computer.
It is not necessary to copy it to the hard
disk.
2
Put the supplied CD-ROM into the
CD-ROM drive of the computer.
When the application software
installation window appears, press the
Exit button to exit it.
CD-ROM drive of the computer.
When the application software
installation window appears, press the
Exit button to exit it.
3
Open [My computer], then put the
cursor on [CD-ROM drive] and right-
click.
When the item list appears, select
[Open (O)].
cursor on [CD-ROM drive] and right-
click.
When the item list appears, select
[Open (O)].
4
Copy the folder of [PjStation for Air
Shot v2] to the hard disk or external
memory.
Shot v2] to the hard disk or external
memory.
5
Execute [AutoConfig.exe].
When you use Windows XP SP2/Vista
If the following window appears in the
middle of the operation, check the [Register
automatically] radio button and click [Next].
If the following window appears in the
middle of the operation, check the [Register
automatically] radio button and click [Next].
[Autoconfiguration done] appears after the
installation is completed.
To continue projecting the pictures, check
the [Start Air Shot v2 and connect to
Projector] check box and click [OK].
installation is completed.
To continue projecting the pictures, check
the [Start Air Shot v2 and connect to
Projector] check box and click [OK].