Sony VPL-VW60 사용자 설명서

51

 

Usi

ng th

e Menus

This feature allows you to adjust the displayable region within 
the four directions of the screen.
Select each screen edge “left / right / top / bottom” on the Blanking 
adjustment screen with 

M / m buttons. Adjust the desired Blanking 

value with 

< / , button.

When both the “Blanking” and the “V Keystone” are adjusted at the 
same time, the “Blanking” cannot be adjusted correctly. When using 
the “Blanking”, make sure that you set the “V Keystone” to “0”.

This feature allows you to adjust the gaps in the color of 
characters or the picture.
When set to “On”, the “Adjust Color” and the “Pattern Color” can be 
assigned and adjusted.  
Adjust Color: Assigns the desired color to adjust the gaps in color. 

Select “R” (Red) or “B” (Blue) to make adjustments based on “G” 
(Green).

Pattern Color: Select “R/G” (Red and Green) or “R/G/B” (White, 

all colors) when the “Adjust Color” is “R” (Red). Select “B/G” 
(Blue and Green) or “R/G/B” (White, all colors) only when the 
“Adjust Color” is “B” (Blue).

Adjust: Assign the settings of the horizontal direction (H) with 

< / , buttons and the vertical direction (V) with M / m buttons 
on the Shift Adjust screen. The colors selected in the “Adjust 
Color” can be adjusted with the 

< / ,, M / m buttons in each 

direction.

Reset: Returns to the factory settings.

Depending on the adjustments made above, the number of display 
pixel may decrease. Also, colors may become uneven or the 
resolution may change.

Tip
If colors appear on the edge of the screen after making the 
adjustments above, adjust the region of the picture to display with 
“Blanking” in the Installation 

 menu. (