Sony 76c 사용자 설명서
28
Setting Up the Projector
Connecting a Component Video Source
If your video source has component video connectors, you can use
them to project a higher quality video image. You’ll need a
component video cable, which can be purchased from Epson (part
number ELPKC19). See page 13 for ordering information.
them to project a higher quality video image. You’ll need a
component video cable, which can be purchased from Epson (part
number ELPKC19). See page 13 for ordering information.
Before starting, make sure the projector and your DVD player or
other video device are turned off.
other video device are turned off.
1. Connect the large end of the component video cable to the
projector’s
Computer(Component Video)
port.
2. Insert the three ends of the component video cable into the
R
,
G
, and
B
ports on your video source.
3. To play sound through the projector, follow the instructions
beginning on page 29.
If you don’t need to make any other connections, you can plug in
your projector and turn it on. See page 32 for instructions.
your projector and turn it on. See page 32 for instructions.
If more than one device is connected to your projector, select
Computer (Component Video)
as the source by pressing the Source
Search button on the projector or the
Comp
button on the remote