Sony 76c 사용자 설명서

4. Turn on your computer or video source if you have not already. 

5. Press the P 

Power

 button on top of the projector to turn it on. 

(You can also press the P 

Power

 button on the remote control.)

The projector beeps and the power light flashes green as the 
projector warms up. The projector lamp comes on in about 4 
seconds and the power light stays green. 

■

If you’re using a computer, you should see your computer 
display projected after a moment or two. If not, you need to 
select the image source. See page 34.

(Windows only: If you see a message saying that it has found 
a plug-and-play monitor, click 

Cancel

.) 

■

If you’re projecting a video, press the 

Source Search 

button 

on the projector or remote control to switch to your video 
source. Then press the 

Play

 button on your DVD player or 

other device.

■

If you are prompted to enter a password, see page 67.

To focus and adjust the image, see page 37. If a projected image fails 
to appear, see “What To Do If You See a Blank Screen” on page 34.

When you’re done with your presentation, shut down the projector as 
described on page 41.

If you are using the remote 
control for the first time, be 
sure to insert the batteries as 
described on the Quick 
Setup poster.

Projector

Remote control

Power button