Epson VS345 사용자 설명서
Parent topic:
Setting the Projector ID
If you want to control multiple projectors from a remote control, give each projector a unique ID.
1.
Press the Menu button.
2.
Select the Extended menu and press Enter.
3.
Select Projector ID and press Enter.
4.
Use the arrow buttons on the remote control to select the identification number you want to use for
the projector. Then press Enter.
the projector. Then press Enter.
Repeat these steps for all the other projectors you want to operate from one remote control.
Parent topic:
Setting the Remote Control ID
The remote control's ID is set to zero by default so it can operate any compatible projector. If you want to
set the remote control to operate only a particular projector, you need to set the remote control's ID to
match the projector's ID.
set the remote control to operate only a particular projector, you need to set the remote control's ID to
match the projector's ID.
1.
Turn on the projector you want the remote control to operate with exclusively.
119