Epson EB-965H 사용자 설명서
If you are having a problem with the projector, first check the projector's indicators and refer to "Reading the Indicators" below.
See the following if the indicators do not show clearly what the problem might be.
s
Reading the Indicators
The projector is provided with the following four indicators that indicate the operating status of the projector.
A
Power indicator
Indicates the projector's status.
B
Status indicator
Indicates the projector's status.
C
Lamp indicator
Indicates the projection lamp status.
D
Temp indicator
Indicates the internal temperature status.
Indicators
Status
Explanation
Power supply
Status
Blue - Lit
Off
Standby condition
Power is being supplied to the projector. When the [t] power button is pressed in this condition, projection
starts.
starts.
Network monitoring
status
status
The projector is being monitored and controlled over a network (when Standby Mode is set to
Communication On
Communication On
). If the power cord is disconnected and connected in this status, the power indicator
flashes blue.
Blue - Lit
Blue - Flashing Warm-up status
This is the status immediately after turning on the projector. Warm-up takes approximately 30 seconds after
the lamp turns on. In this status you cannot turn off the projector, even if you press the [t] power button.
the lamp turns on. In this status you cannot turn off the projector, even if you press the [t] power button.
Problem Solving
130