Epson EB-965H 사용자 설명서

다운로드
페이지 181
Changing the Aspect Ratio of the Projected Image
You  can  change  the  Aspect  Ratio
 of  the  projected  image  to  suit  the  type,
the  ratio  of  height  and  width,  and  the  resolution  of  the  input  signals.
Available  aspect  modes  vary  depending  on  the  image  signal  currently  being
projected.
Changing  methods
Each  time  you  press  the  [Aspect]  button  on  the  remote  control,  the  aspect
mode  name  is  displayed  on  the  screen  and  the  aspect  ratio  changes.
Remote control
a
You  can  set  the  aspect  ratio  from  the  Configuration  menu.
s
  Signal   -   Aspect  
Changing  the  aspect  mode
Projecting  images  from  video  equipment  or  from  the  HDMI  port  (For  EB-955WH/
EB-950WH/EB-W29)
Each  time  the  [Aspect]  button  is  pressed,  the  aspect  mode  changes  in  the
order   Normal  or  Auto,   16:9,   Full,   Zoom,   and   Native.
Example:  1080p  signal  input  (resolution:  1920x1080,  aspect  ratio:  16:9)
A
Normal or Auto
B
16:9
C
Full
D
Zoom
E
Native
Projecting  images  from  video  equipment  (For  EB-965H/EB-945H/EB-940H/EB-98H/
EB-97H/EB-X30/EB-X29/EB-X27/EB-S29/EB-S27)
Each  time  the  [Aspect]  button  is  pressed,  the  aspect  mode  changes  in  the
order   4:3  and  16:9.
When  inputting  a  720p/1080i  signal  and  the  aspect  mode  is  set  to  4:3,   a  4:3
zoom   is   applied   (the   right   and   left   sides   of   the   image   are   cut   off).
Example: 720p signal input (resolution: 1280x720, aspect ratio: 16:9)
Adjusting Projected Images
55