Epson EB-460 사용자 설명서

다운로드
페이지 153
Clean  the  projector  if  it  becomes  dirty  or  if  the  quality  of  the  projected
images  starts  to  deteriorate.
Cleaning the Projector's Surface
Clean  the  projector's  surface  by  wiping  it  gently  with  a  soft  cloth.
If  the  projector  is  particularly  dirty, moisten  the  cloth  with  water  containing
a  small  amount  of  neutral  detergent,  and  then  firmly  wring  the  cloth  dry
before  using  it  to  wipe  the  projector's  surface.
Attention
Do  not  use  volatile  substances  such  as  wax,  alcohol,  or  thinner  to  clean  the
projector's  surface.  The  quality  of  the  case  may  change  or  become  discolored.
Cleaning the Projection Window
Use  a  commercially  available  cloth  for  cleaning  glasses  to  gently  wipe  off
dirt  from  the  projection  window.
 Warning
Do  not  use  sprays  that  contain  flammable  gas  to  remove  dirt  and  dust  from  the
lens.  The  projector  may  catch  fire  because  of  the  high  temperature  of  the  lamp
inside  the  projector.
Attention
Do  not  rub  the  lens  with  harsh  materials  or  subject  the  lens  to  shocks,  as  it
can  easily  become  damaged.
Cleaning the Air Filter
Clean  the  air  filter  and  the  air  intake  vent  when  the  following  message  is
displayed.
"The  projector  is  overheating.  Make  sure  nothing  is  blocking  the  air  vent,
and  clean  or  replace  the  air  filter
".
Attention
Dust  collecting  on  the  air  filter  may  cause  the  internal  temperature  of  the
projector  to  rise,  leading  to  a  malfunction  or  early  deterioration  of  optical
parts.  If  the  message  is  displayed,  clean  the  air  filter  as  soon  as  possible.
Do  not  rinse  the  air  filter  in  water.  Do  not  use  detergents  or  solvents.
Cleaning Parts
108