Epson EB-460 사용자 설명서
q
• If Password Protect is already activated, you are requested to enter
the Password.
If the Password is entered correctly, the Password Protect setting
menu is displayed. s "Entering the Password"
If the Password is entered correctly, the Password Protect setting
menu is displayed. s "Entering the Password"
• When the password is set, stick the supplied password protect sticker
in a visible position on the projector as a further theft deterrent.
B
Turn on Power On Protect.
(1)
Select Power On Protect, and then press the [Enter] button.
(2)
Select On, and then press the [Enter] button.
(3)
Press the [Esc] button.
C
Turn on User's Logo Protect.
(1)
Select User's Logo Protect, and then press the [Enter] button.
(2)
Select On, and then press the [Enter] button.
(3)
Press the [Esc] button.
D
Turn on Network Protect.
(1)
Select Network Protect, and then press the [Enter] button.
(2)
Select On, and then press the [Enter] button.
(3)
Press the [Esc] button.
E
Set the Password.
(1)
Select Password, and then press the [Enter] button.
(2)
When the message "Change the password?" is displayed, select Yes and
then press the [Enter] button. The default setting for the Password is
"0000". Make sure you change this to your own desired password. If you
select No, the screen displayed in step 1 is displayed again.
then press the [Enter] button. The default setting for the Password is
"0000". Make sure you change this to your own desired password. If you
select No, the screen displayed in step 1 is displayed again.
(3)
While holding down the [Num] button, enter a four digit number using the
numeric buttons. The number entered is displayed as "* * * *". When you
enter the fourth digit, the confirmation screen is displayed.
numeric buttons. The number entered is displayed as "* * * *". When you
enter the fourth digit, the confirmation screen is displayed.
Remote Control
(4)
Re-enter the Password.
The message "Password accepted." is displayed.
If you enter the Password incorrectly, a message is displayed prompting
you to re-enter the password.
The message "Password accepted." is displayed.
If you enter the Password incorrectly, a message is displayed prompting
you to re-enter the password.
Entering the Password
When the Password entry screen is displayed, enter the Password using the
numeric buttons on the Remote Control.
numeric buttons on the Remote Control.
Procedure
While holding down the [Num] button, enter the Password by
pressing the numeric buttons.
pressing the numeric buttons.
When you enter the correct Password, projection begins.
Security Functions
51