Epson EB-460 사용자 설명서
Operation Steps
Using Easy Interactive Function for the first time
s
It is only necessary to install the driver and perform calibration the first
time.
time.
1.
Connect the computer cable and USB cable, and turn on the computer.
2.
Install Easy Interactive Driver.
3
Turn on the projector and start Easy Interactive Driver.
4.
Perform position alignment (calibration).
After calibration, Easy Interactive Function is ready for use.
From the second time
s
You can use Easy Interactive Function by just starting Easy Interactive
Driver.
Driver.
You will need to perform calibration again when you use a computer with a
different resolution or change the projection area.
different resolution or change the projection area.
System Requirements
For Windows
OS
Windows 2000 Service Pack 4 or later
Windows XP Service Pack 2 or later
(Home Edition/Professional)
Windows Vista
Windows XP Service Pack 2 or later
(Home Edition/Professional)
Windows Vista
*
(All editions except for Starter)
Windows 7
Windows 7
*
CPU
Pentium III 1.2GHz or faster
Recommended: Pentium M 1.6GHz or faster
Recommended: Pentium M 1.6GHz or faster
Amount of Memory
256MB or more
Hard Disk
Free Space
Free Space
100MB or more
Display
Resolution greater than XGA (1024x768)
*
32-bit versions only
For Mac OS
OS
Mac OS X 10.3.x
Mac OS X 10.4.x
Mac OS X 10.5.x
Mac OS X 10.6.x
Mac OS X 10.4.x
Mac OS X 10.5.x
Mac OS X 10.6.x
CPU
Power PC G3 900MHz or faster
Recommended: Intel Core Duo 1.5GHz or faster
Recommended: Intel Core Duo 1.5GHz or faster
Amount of Memory
256MB or more
Hard Disk
Free Space
Free Space
100MB or more
Display
Resolution greater than XGA (1024x768)
q
Some settings on the computer may need to be changed to use the
mouse function. See the documentation supplied with the computer.
mouse function. See the documentation supplied with the computer.
Easy Interactive Function (EB-460i/450Wi only)
55