Epson EB-460 사용자 설명서

When  this  is  set,  you  receive  an  e-mail  notification  if  a  problem  or  warning  occurs  in  the  projector.  For  information  on  the  contents  of  the  sent  Mail,
see  

 

s

 

Sub Menu

Function

Mail Notification

You can set whether or not (On/Off) to be notified by mail.

SMTP Server

You can input the IP address

 of the SMTP Server used by the projector.

You can input a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)

Port Number

You can input the Port Number for the SMTP Server. The default value is 25. You can input numbers between 1 to 65535.

Address 1 Setting
Address 2 Setting
Address 3 Setting

Enter the Email Address and the contents of the email to receive notification when an error or warning occurs in the projector. You can enter up to 32
characters for the mail address. You can select multiple problems or warnings to be notified about by Mail. You can also change each Email Address.

q

If  you  set  Standby  Mode  to  Communication  On  from  the  Extended  menu  in  the  Configuration  Menu  of  the  projector,  you  can  perform  monitoring  even  if  the
projector   is   in   a   standby   state   (when   the   power   is   off).