Epson EB-G5100 사용자 설명서

There are two ways to correct distortion in projected images as below.

• Quick Corner

This allows you to manually correct each of the four corners of the 
projected image separately. s

• H/V-Keystone

This allows you to manually correct distortion in the horizontal and 
vertical directions independently. H/V-Keystone correction is ideal for 
fine-tuning Keystone distortion. You can perform easy corrections by 

using the [

], [

], [

], and [

] buttons on the 

projector's control panel. 

s

These two methods cannot be used together. When the "Keystone" 
correction method is selected from the Configuration menu, the 
correction method you choose is assigned to the control panel 

[

], [

], [

], and [

] buttons. The default setting for 

"Keystone" is set to " H/V-Keystone", when [

], [

], [

], 

and [

] buttons are pressed, H/V-Keystone correction is carried 

out.

Because "Quick Corner" and "H/V-Keystone Correction" can be 
carried out while projecting a test pattern, you do not need to make 
preparations by connecting a computer or other equipment.

A

Press the [Menu] button on the projector, and then 
from the configuration menu select Settings - 
Keystone. s "Using the Configuration Menu" 

B

Press the [Enter] button again to display the selection screen from 
which you can select one of four corners.

Using the remote control

Using the control panel