Epson 7850p 사용자 설명서

You see the following screen:

6. For Mail Notification Settings, select 

ON

 and press 

Enter

 on the 

remote control.

7. Highlight the 

IP address of SMTP server

 box and press 

Enter

. 

The outline of the box turns green to indicate you are in input 
mode. You can enter numbers between 0 and 255. However, you 
cannot use the following IP addresses: 255.255.255.255, 
224.0.0.0, or 127.x.x.x (where x is a number between 0 and 255).

8. Highlight the 

Port Number

 box and press 

Enter

. Then enter the 

SMTP server port number. The default value is 25, but you can 
enter numbers between 1 and 65535.

9. Highlight the box for 

Destination address 1

 and press 

Enter

. 

Enter the e-mail address for the first computer that you want to 
receive e-mail alerts. You can enter a maximum of 53 single-byte 
alphanumeric characters.

10. If you want to send e-mail alerts to one or two other computers, 

enter addresses for those computers in 

Destination address 2

 

and 

Destination address 3

.

11. Select the conditions under which an e-mail alert will be sent.

Num

Num

Enter