Epson EB-940H 사용자 설명서

Check

Remedy

Is Make the movement of the mouse pointer smooth. selected?

Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Ver.x.xx Settings, and then select
the Make the movement of the mouse pointer smooth. checkbox. (This is not available for Windows 2000.)
For Windows Vista/7, Windows Aero is disabled when this is selected.

Check

Remedy

Is a wide panel computer image being projected?
(Only when projecting computer images)

Change the setting according to the signal for the connected equipment.

s

 Signal - Resolution 

Is the image still being enlarged by E-Zoom?

Press the [Esc] button on the remote control to cancel E-Zoom.

s

Is the image position adjusted correctly?

Press the [Auto] button on the remote control or the [Enter] button on the control panel to perform automatic
adjustment of the computer image being projected. If the images are not adjusted correctly even after performing
automatic adjustment, you can also make adjustments from the Configuration menu.
Apart from computer image signals, you can adjust other signals while projecting from the Configuration menu.

s

 Signal - Position 

Is the computer set for dual display?
(Only when projecting computer images)

If dual display is activated in the Display Properties of the computer's Control Panel, only about half of the image on the
computer screen is projected. To display the entire image on the computer screen, turn off the dual display setting.

s

 Computer video driver documentation

Is the correct resolution selected?
(Only when projecting computer images)

Set the computer so that the signals being output are compatible with the projector.

s

s

 Computer's documentation

Is the projection mode correct?

Depending on how the projector is installed, set the projection mode from one of the following: Front, Front/Ceiling,
Rear

, Rear/Ceiling.

s

 Extended - Projection 

s