Epson EB-940H 사용자 설명서
1. Set the projector ID.
Set a unique projector ID for each of the target projectors so that you can
limit which projector is being corrected.
limit which projector is being corrected.
2. Correct the color difference.
You can carry out color correction when projecting from multiple projectors.
Setting an ID and using the remote control
By setting an ID for each projector, you can limit which projector is
operated from the remote control.
operated from the remote control.
You can set an ID for the projector within a range of "1" to "9". The default
value is Off.
value is Off.
On the remote control, select the Projector ID from 0 to 9 for the projector
you want to operate. The following examples show the combination of IDs
for the Projector ID and the ID selected with the remote control.
you want to operate. The following examples show the combination of IDs
for the Projector ID and the ID selected with the remote control.
Opera
tion
Combinations
Descriptions
Possible
Projector ID: 1
When the Projector ID and
the ID selected with the
remote control match, you
can operate the projector
from the remote control.
the ID selected with the
remote control match, you
can operate the projector
from the remote control.
ID selected with remote
control: 1
control: 1
Possible
Projector ID: Off
When the Projector ID is set
to Off, you can operate the
projector regardless of the ID
selected with the remote
control.
to Off, you can operate the
projector regardless of the ID
selected with the remote
control.
ID selected with remote
control: 1
control: 1
Opera
tion
Combinations
Descriptions
Possible
Projector ID: 1
When 0 is selected with the
remote control, you can
operate the projector from
the remote control regardless
of the Projector ID.
remote control, you can
operate the projector from
the remote control regardless
of the Projector ID.
ID selected with remote
control: 0
control: 0
Not possi-
ble
ble
Projector ID: 1
When the Projector ID and
the ID selected with the
remote control do not match,
you cannot operate the
projector from the remote
control.
the ID selected with the
remote control do not match,
you cannot operate the
projector from the remote
control.
ID selected with remote
control: 3
control: 3
Setting the Projector ID
a
Press the [Menu] button while projecting.
s
Control panel
Projection Functions
76