Epson G5000 사용자 설명서

다운로드
페이지 6
Switching Between Image 
Sources
Press the Source 
Search button on the 
projector
Press the Search button 
or one of the Source 
buttons on the remote 
control
Note: The BNC, EasyMP, and HDMI 
buttons are not applicable to this 
projector. 
Adjusting Image Position
If the projector is mounted to the 
ceiling, use the vertical lens shift dial 
to move your image up or down or 
use the horizontal lens shift dial to 
move your image left or right. You 
can also use the ceiling mount to 
adjust the position.
Horizontal lens shift dial
Vertical lens shift dial
If the projector is on a table, place 
it so it faces the screen as squarely 
as possible. To raise the image, use 
the vertical lens shift dial as shown 
above, or press the blue foot release 
lever and lift the front of the projector 
to extend the front adjustable foot. 
Release the lever to lock the foot in 
position.
Correcting Image Shape
  If your image looks like 
 or 
press the  or  button on the 
projector to correct it. You can also 
use the remote control to correct 
the image shape (see the User’s 
Guide
).
  If your image looks like
or
,  
press the 
 or
 button to 
correct it. You can also use the 
remote control to correct the image 
shape (see the User’s Guide).
  If your image is uneven on all sides, 
you can use Quick Corner
®
 to 
adjust the shape. See the  
User’s Guide.
Changing the Aspect Ratio
Press the 
Aspect button on the remote 
control to change the aspect ratio.
For images input through the 
Computer1 or Computer2 ports, 
select 
Normal to automatically resize 
the image.
Turning the Projector Off
Press the   power button to turn 
the projector off. At the confirmation 
message, press the   power button 
again.
Note: If the Direct Power On function is 
enabled, you can unplug the projector or flip 
the switch controlling the outlet to which the 
projector is connected instead.
With Epson’s Instant Off
®
 technology, 
you don’t have to wait for the projector 
to cool down; just turn it off or unplug 
it when you’re done.
You can fine-tune the height or level 
the image by turning any of the 
projector’s adjustable feet. Use the 
horizontal lens shift dial to move your 
image left or right.
Focusing and Zooming
Turn the focus ring to sharpen the 
image.
Turn the zoom ring to reduce/enlarge 
the image.
Installing the Manuals
1.  Insert the projector CD in your 
computer’s CD or DVD drive. 
(Double-click the 
Epson installer 
icon, if necessary.)
2.  Select your language, follow the 
instructions on the screen to 
register, then click 
User’s Guide,
EMP Monitor Operation Guide
(Windows) or 
User’s Guide 
(Macintosh) to install the manuals. 
(If you are using Windows and you 
don’t have Adobe
®
 Reader
®
,
 
click
Adobe Reader to install it also.) 
Then click 
Exit.
3.  To view the manuals, double-click 
the 
PowerLite G5000 User’s Guide
or
EMP Monitor Operation Guide 
(for Windows users only) icon on 
your computer’s desktop.
Turning the Projector On
1.  Turn on your computer or image 
source.
2.  Remove the lens cover. 
3.  Press the   power button. After 
the power light stays green, the 
projector is ready.
 
Note: If the Direct Power On function is 
enabled, you can turn the projector on 
without pressing the   power button; 
just plug it in or flip the switch controlling 
the outlet to which the projector is 
connected. To turn on this feature, see 
the User’s Guide.
4.  If your image does not appear, see 
“Switching Between Image Sources” 
or “Troubleshooting.”
Troubleshooting
If you see a blank screen or the
message No signal
  Make sure the 
 power light on 
the projector is green and not 
flashing, and the lens cover is 
removed.
  Make sure the cables are 
connected correctly. See the 
User’s Guide.
  You may need to change the 
image source. See “Switching 
Between Image Sources.” (Also 
make sure the source device is 
turned on.)
If the projector and the notebook
don’t display the same image
Windows
®
:
Hold down the 
Fn key and press 
the function key on your notebook 
(such as
or 
CRT/LCD) until you 
see the display on both monitors. 
If that does not work, open the 
Windows 
Control Panel, click 
DisplaySettings, and Advanced
Make sure the external monitor port is 
set as your primary display. See your 
computer’s documentation or online 
help for details.
Macintosh
®
:
From the Apple
®
 menu, select 
System
Preferences, Displays, Detect
Displays, VGA Display
or Color LCD, 
and 
Arrangement or Arrange. Then 
select 
Mirror Displays.
Where To Get Help
Internet support
Visit Epson’s support website at 
epson.com/support and select your 
product for solutions to common 
problems. You can download utilities 
and documentation, get FAQs and 
troubleshooting advice, or e-mail 
Epson with your questions.
Speak to a support representative
To use the Epson PrivateLine
®
 Support 
service, call (800) 637-7661 and 
enter the PIN on the included Epson 
PrivateLine Support card. This service 
is available 6 
AM
 to 6 
PM
, Pacific 
Time, Monday through Friday, for 
the duration of your warranty period. 
You may also speak with a projector 
support specialist by dialing one of 
the following numbers. (Toll or long 
distance charges may apply.)
U.S.: (562) 276-4394, 6 
AM
 to 6 
PM
Pacific Time, Monday-Friday
Canada: (905) 709-3839, 6 
AM
 to 
PM
, Pacific Time, Monday-Friday
Days and hours of support are subject 
to change without notice. 
Purchase supplies and accessories
 
You can purchase screens and other 
accessories from an Epson authorized 
reseller. To find the nearest reseller, 
call 800-GO-EPSON (800-463-7766). 
Or you can purchase online at  
www.epsonstore.com (U.S. sales) or 
www.epson.ca (Canadian sales).