Epson 7600p 사용자 설명서

You can use the remote control to select your source, adjust the 
volume, temporarily turn off the picture and sound, freeze the action, 
zoom in on the picture, or display a picture-in-picture video image. 
Make sure you have set up your projector and connected your audio 
or video source as described in Chapter 1 or Appendix A.

If you’ve connected your projector to more than one computer and/or 
video source, you can use the buttons on the remote control (or the 
control panel) to switch between the different sources. 

■

Press the 

Video

 button to switch between a standard composite 

video source and an S-Video source. 

■

Press the 

Comp1

 button to select your first computer. 

■

Press the 

Comp2/YCbCr

 button to select your second computer 

or a component video source.

After you select a source, the screen goes dark for a moment before the 
image appears.

If you’ve connected an audio source to the projector, you can adjust 
the sound that’s output through the projector’s speakers. 

■

To increase the volume, press on the right (

+

) side of the 

Volume

 

button.

■

To reduce the volume, press on the left (

–

) side of the 

Volume

 

button.

E@sy-MP

select video 
source

select 
computer 1

select 
computer 2 
or 
component 
video

adjust 

volume

5600 and 7600.book  Page 34  Thursday, December 14, 2000  2:46 PM