Epson 7600p 사용자 설명서

6. Insert the new lamp as shown. 

7. Make sure the lamp is fully seated, then tighten its screws.

8. Replace the lamp cover and tighten its screw securely. (The 

projector won’t come on if the lamp cover is loose.)

9. Reset the lamp timer as described in the following section.

After installing a new lamp, you need to reset the timer so the 
projector can keep track of how many hours it has been used. Follow 
these steps:

1. Plug in the projector and turn it on (see page 22).

2. After the projection lamp comes on, press the 

Help

 button and 

hold it down for at least 5 seconds. 

You see the Help menu, and then the following message:

Reset Lamp ON Time

Do you reset the Lamp ON Time?

Yes

No

:Select

:Execute

5600 and 7600.book  Page 62  Thursday, December 14, 2000  2:46 PM