Epson 7600p 사용자 설명서

The projector can be installed for three different viewing setups: front 
projection, ceiling mounting, or rear projection onto a 
semi-transparent screen, as shown: 

To project from overhead, you’ll need to select 

Ceiling

 in the 

projector’s Advanced menu. To project from the rear, select 

Rear 

Proj

. See “Setting Advanced Features” on page 54.

If you’re ceiling-mounting the projector and you place it above screen 
level, you’ll have to tilt it down to position the image on-screen. This 
causes the image to lose its square shape. You can then correct the 
distortion by using the 

Keystone

 function in the projector’s menu 

system (see “Customizing Projector Features” on page 53) or by using 
the 

Keystone

 button on the projector’s control panel. 

If you place the projector’s lens so it’s level with the top of the screen, 
the image will be square and you won’t have to adjust it. If you place 
the lens lower than the top of the screen, you’ll have to tilt the 
projector upward if you want to fill the whole screen with the image. 

If you want to be able to control the projector’s settings from a 
computer, you can install the EMP Link V program on the Projector 
Software CD-ROM. You’ll also need a serial cable to connect the 
projector to the computer. 

front projection

ceiling mounting

rear projection

See “Positioning the 
Projector” on page 10 for 
more information.

5600 and 7600.book  Page 78  Thursday, December 14, 2000  2:46 PM