Epson EMP-715/505 사용자 설명서

다운로드
페이지 134
 When the Indicators Provide No Help - 107
EMP-715/505E  trouble.fm
The projector will not switch off (after the [Power] button has 
been pressed)
Problems with EasyMP images
Problems when using the EasyMP Software
Point
If an abnormality remains after checking the results of the above inspections, disconnect 
the Power Plug from the socket and contact your dealer or nearest address provided at 
page 121.
Is the Operation Indicator illuminated in orange?
The projector has been designed so that the Operation Indicator is not 
extinguished even when the power has been switched off.
The Operation Indicator will be extinguished when the Power Plug 
has been disconnected from the socket.
The fan will not cease operations.
The cool-down process (to allow the projector lamp to cool down; the 
operation indicator will blink in orange) will be performed after the 
power has been switch off by pressing the [Power] button. The 
operation indicator will be illuminated in orange when this has been 
completed, so remove the power plug from the socket at this point.
*The amount of time required for the cool-down process will depend 
on the external temperature.
The image acts strangely (distorted)
A jpeg image with a resolution that cannot be displayed normally is 
being used. If the image is not displayed normally, adjust the 
resolution so that the vertical lines are double 8-pixels and the 
horizontal lines are double 8-pixels or double 32-pixels. There should 
be no trouble with scenario files created with the EasyMP Software or 
images with a normal resolution (VGA, XGA.)
PowerPoint files (.ppt) will not be displayed in the file window.
Files created with PowerPoint 95 and files saved in the PowerPoint 95 
format cannot be edited with the EasyMP Software. These files must 
first be resaved in the PowerPoint 97 or PowerPoint 2000 formats 
before they can be used.
Not possible to paste PowerPoint files (.ppt) onto scenarios or display 
thumbnails.
It could be that the MS-Office jpeg converter has not been installed. 
Displays the [Converters and Files] - [Graphic Filter] option from the 
Office97 installer, and then install it all or only the jpeg filter (the jpeg 
filter is installed with the standard Office2000 installation.)
Created scenarios files cannot be edited.
Scenario files (.sit) that have been transferred across to the memory 
card cannot be edited. Use the scenario data (.sic) temporarily saved 
in the EasyMP Software.
OFF
715_505E.bk  Page 107  Friday, May 25, 2001  10:24 AM