Epson EMP-715/505 사용자 설명서
Troubleshooting - 97
EMP-715/505E trouble.fm
Lamp Indicator
Blinking in
Green
Green
Warm-up in
progress
progress
(Not an error)
· Wait for a moment.
· The green lamp will stop blinking and
· Wait for a moment.
· The green lamp will stop blinking and
become illuminated once the warm-up
procedure has been completed.
procedure has been completed.
37
Blinking in Red
Internal error
Cease operations, remove the Power Plug from
the socket and contact your dealer or nearest
address provided at page 121 and request
repairs.
the socket and contact your dealer or nearest
address provided at page 121 and request
repairs.
Extinguished
The power is not
switched on
switched on
The power is not switched on.
· Check the power cord connection.
· Check the power supply to the socket.
· Check the power cord connection.
· Check the power supply to the socket.
36
Indicator Status
Cause
Recovery and Status
Reference
Page
Illuminated in
red
red
Time to replace the
lamp.
lamp.
Replace the lamp with a new one (ELPLP14).
Blinking in Red
Lamp error
· Replace with a new lamp (ELPLP14).
· Check to ensure that the lamp or fan are
· Check to ensure that the lamp or fan are
correctly attached if the lamp has been
replaced. If the lamp or fan are not correctly
attached, the projector will assume the same
status as if the power has not been switched
on.
replaced. If the lamp or fan are not correctly
attached, the projector will assume the same
status as if the power has not been switched
on.
· If the lamp is broken, take care to avoid injury
and contact your nearest address provided at
page 121 to request repairs (images cannot be
projected unless the lamp is replaced).
page 121 to request repairs (images cannot be
projected unless the lamp is replaced).
111
Blinking in
Orange
Orange
Nearing the time
for replacing the
lamp
for replacing the
lamp
Prepare a new lamp. It is recommended that
the lamp is replaced as soon as possible, as
there are cases where the time for replacement
is earlier than stated in the conditions of usage.
the lamp is replaced as soon as possible, as
there are cases where the time for replacement
is earlier than stated in the conditions of usage.
111
Extinguished
(Not an error)
The power has not been switched on or nor-
mal projection is in progress.
The power has not been switched on or nor-
mal projection is in progress.
Indicator Status
Cause
Recovery or Status
Reference
Page
715_505E.bk Page 97 Friday, May 25, 2001 10:24 AM