Epson 760c 사용자 설명서

Epson PowerLite 750c/760c Projector

8/05

Epson PowerLite 750c/760c Projector

4. Highlight

and press

Enter

5. Press

Esc

to exit.

The setting will take effect the next time you plug in the
projector.

Note:
When Direct Power On is enabled, shut down the projector as you
normally would. Follow the instructions in the next section. (The
projector will start automatically when power is restored after a
power failure if it is plugged in.)

Shutting Down the Projector

When you’ve finished using the projector, follow the
recommended procedure to shut it down. This extends the
lamp life and protects the projector from possible overheating.

1. Turn off any equipment plugged into the projector.

2. To turn off the projector, press the P

Power

button on the

projector or remote control. You see a confirmation message.
(If you don’t want to turn it off, press any other button.)

3. Press the P

Power

button again. The

Power

light flashes

orange as the projector cools down. When the projector
beeps twice, it’s safe to unplug it.

(If the projector is mounted on the ceiling, it takes
10 seconds to cool down before you can unplug the power
cord.)

Caution:
Never unplug the projector when the

Power

light is green or

flashing orange.

To turn the projector on again, wait until the

Power

light

stops flashing. Then press the P

Power

button.

4. Press up on the blue foot release lever and lower the

projector to retract the front adjustable foot, as shown.

5. Replace the lens cap.

Using the Remote Control

When using the remote control, stand within 20 feet of the
projector. Point the remote control either at the projector or at
the screen (the projector’s front sensor can detect signals
bounced off the screen). Press the button for the function you
want to use.

Turning Off the Picture and Sound

You can use the

A/V Mute

button on the remote control to turn

off the image and sound. This is useful if you want to
temporarily re-direct your audience’s attention.

❏ To turn off the picture and sound, press the

A/V Mute

button. The screen turns blue (or black or displays a user-
defined image).

❏ To turn the image and sound back on, press the

A/V Mute

button again.

You can create an image, such as a company logo or a picture, to
display on the screen whenever you press the

A/V Mute

button.

See the User’s Guide for more information.

Stopping Action

Press the

Freeze

button to stop the action in your video or

computer image and keep the current image on the screen.

Note:
This function pauses the image, but not the sound. Also, because the
source continues to transmit signals, you won’t resume the action
from the point you stopped it.

To restart the action, press the

Freeze

button again.

Zooming Your Image

Follow these steps to zoom in on a portion of the image:

1. Press the

E-Zoom

button on the remote control. You see

a crosshair indicating the center of the zoom-in area.

2. Use the

pointer button to position the crosshair in the

area you want to enlarge.

3. Continue pressing the

E-Zoom

button to enlarge the

selected area up to 4 times.

4. While the image is enlarged, you can:

❏ Use the

pointer button to move around the screen.

❏ Press the

E-Zoom

button to zoom out.

5. When you’re done, press the

Esc

button to return the image

to its original size.