Epson 745c 사용자 설명서
Epson PowerLite 745c Projector
8/04
Epson PowerLite 745c Projector
-
21
Cleaning the Lens
Clean the lens whenever you notice dirt or dust on the surface.
❏ Use a canister of compressed air to remove dust.
❏ To remove dirt or smears on the lens, use lens-cleaning
❏ Use a canister of compressed air to remove dust.
❏ To remove dirt or smears on the lens, use lens-cleaning
paper. If necessary, moisten a soft cloth with lens cleaner and
gently wipe the lens.
gently wipe the lens.
Caution:
Do not use glass cleaner to clean the lens.
Do not use glass cleaner to clean the lens.
Cleaning the Projector Case
Before you clean the case, first turn off the projector and unplug
the power cord.
❏ To remove dirt or dust, wipe the case with a soft, dry,
the power cord.
❏ To remove dirt or dust, wipe the case with a soft, dry,
lint-free cloth.
❏ To remove stubborn dirt or stains, wipe the case with a soft
cloth moistened with a mild detergent.
Caution:
Do not use wax, alcohol, benzene, paint thinner, or other
chemical detergents. These can damage the case.
Do not use wax, alcohol, benzene, paint thinner, or other
chemical detergents. These can damage the case.
Cleaning and Replacing the Air Filter
Clean the air filter and air vents on the bottom of the projector
after every 100 hours of use. If not cleaned periodically, they
can become clogged with dust, preventing proper ventilation.
This can cause overheating and damage the projector.
after every 100 hours of use. If not cleaned periodically, they
can become clogged with dust, preventing proper ventilation.
This can cause overheating and damage the projector.
1. Turn off the projector, allow it to cool down, and unplug the
power cord.
2. Turn the projector upside down.
Use a small vacuum cleaner designed for computers and
other office equipment. If you don’t have one, use a very soft
brush (such as an artist’s brush).
other office equipment. If you don’t have one, use a very soft
brush (such as an artist’s brush).
If dirt is difficult to remove or the filter is torn, replace it.
Contact your dealer or call Epson at (800) 873-7766
to obtain a new set (part number V13H134A08). In
Canada, please call (800) 463-7766 to locate a dealer.
Contact your dealer or call Epson at (800) 873-7766
to obtain a new set (part number V13H134A08). In
Canada, please call (800) 463-7766 to locate a dealer.
Note:
When you get a replacement lamp for your projector, a new air
filter is included. Replace the filter when you replace the lamp.
When you get a replacement lamp for your projector, a new air
filter is included. Replace the filter when you replace the lamp.
Red
Flashing
red
red
Off
The lamp is burned out,
broken, or not installed
correctly, or the lamp cover is
open. Close the cover or
replace or reseat the lamp, if
necessary, as described on
page 22.
broken, or not installed
correctly, or the lamp cover is
open. Close the cover or
replace or reseat the lamp, if
necessary, as described on
page 22.
Red
Flashing
orange
orange
Off
Replace the lamp with a new
one as soon as possible. See
page 22 for instructions. If
you continue to use the lamp,
there is a risk it may break.
one as soon as possible. See
page 22 for instructions. If
you continue to use the lamp,
there is a risk it may break.
Red
Off
Red
The projector has overheated
and turned itself off. Let it
cool for about five minutes,
then turn it back on. Make
sure there is plenty of space
around and under the
projector for ventilation. Also
clean the air filter and air
exhaust vents. If it continues
to overheat, you may need to
replace the air filter.
and turned itself off. Let it
cool for about five minutes,
then turn it back on. Make
sure there is plenty of space
around and under the
projector for ventilation. Also
clean the air filter and air
exhaust vents. If it continues
to overheat, you may need to
replace the air filter.
Flashing
red
red
Off
Flashing
orange
orange
Rapid cooling is in progress.
Make sure the room is not
above 95 °F and there is
plenty of space around and
under the projector for
ventilation. Clean the air filter
and air vents, if necessary.
Make sure the room is not
above 95 °F and there is
plenty of space around and
under the projector for
ventilation. Clean the air filter
and air vents, if necessary.
Orange
Off
Off The
projector is in standby or
sleep mode. You can unplug
it or press the P Power
button to turn it on.
it or press the P Power
button to turn it on.
Power
light
light
Lamp
light
light
Temperature
light
light
Description