Epson 31000 사용자 설명서

Setting Up the Projector

If you press the 

source button on the projector, you see a list of available sources. Press 

the 

source button to move through the list and select the desired source.

Note: If an image does not appear, see “Problem Solving” on page 61.

To temporarily turn off the image and darken the screen, press the Blank button on the remote 
control. Press the Blank button again to return to normal viewing.

You can display a test pattern to help adjust the image position by pressing the 

Pattern

 

button on the remote control. Select 

Display Position

, then press 

Enter

. Press the 

Esc

 

button to turn off the test pattern. You can also use the 

Pattern

 button to isolate colors when 

displaying color bars (see page 36). 

If the image is not centered on the screen, use the lens shift function, as described below, to 
adjust its position.

■

If the image looks like 

or 

, make sure the projector is not tilted up or down. 

Instead, keep the projector level, then use the lens shift to position the image on the 
screen.

■

If the image looks like 

or 

, the projector has been placed off to one side of the 

screen and angled toward it. Instead, face the projector straight ahead, then use the lens 
shift to center the image.