Epson 31000 사용자 설명서

Making Detailed Adjustments

■ Setup Level

Note: This setting can be used only when an NTSC signal is being input through the Video or 
S-Video port, or when a video signal is being input through the Component video ports.

This setting adjusts the threshold at which dark areas of the image are rendered black 
(0 IRE). For compatibility with most DVD and video equipment sold in North America, 
leave this setting at 0%. Check your video equipment’s specifications to be sure of the 
correct setting. 

■ EPSON Super White

Note: This setting can be used only when a signal is being input through the HDMI1 or HDMI2 
port and the Color Mode is set to THX or Cinema (see page 27).

If bright parts of the image are washed out or overexposed (when the input signal 
contains values over 100 IRE), turn this setting on to compensate. 

■ HDMI Video Range

Note: This setting can be used only when EPSON Super White is turned off and a signal is 
being input through the HDMI 1 or HDMI 2 port.

If your video equipment has an HDMI port and you’ve connected it to the projector 
using an HDMI cable, set the level of the projector to match that of the video equipment.

■ Power Consumption

This setting controls the light output from the projector. On 

Normal

, the projector 

produces a brighter image and the lamp uses more power. To save power, extend the life 
of the lamp, and reduce fan noise, select 

ECO

.

If the image looks fuzzy, or if it contains noise or flickering, you can use these settings to 
correct it.

Signal > Advanced > Setup Level

Signal > Advanced > EPSON Super White

Signal > Advanced > HDMI Video Range

Image > Power Consumption