Epson 31000 사용자 설명서

Problem Solving

■

Make sure the lens is not fogged by condensation. If you’ve just moved the projector from 
a cold environment, wait a couple of minutes before using it.

■

Adjust the 

Sharpness

Super-resolution

 (see page 38).

■

If you’re projecting from a computer, you may need to adjust the 

Tracking

 and 

Sync 

settings (see page 39).

■

Make sure the 

Input Signal

 is set correctly for your connected video equipment (see 

■

Press the 

Color Mode 

button on the remote control to select a different color mode (see 

■

Check the brightness and contrast settings (see page 33).

■

Fine-tune the colors with the settings listed on page 36.

■

If the picture looks dark, check the 

Lens Iris

 setting (see page 33), as well as the 

Brightness

 and 

Contrast

. You may also need to replace the lamp. Check the lamp usage 

timer to see how long the lamp has been in use (see page 59). Replace the lamp if it’s close 
to the end of its service life (see page 56). 

■

Make sure you’re within about 30 feet of the projector, and the remote control is aimed at 
the projector’s front or back sensor within the ranges shown below.

■

You may need to replace the remote control batteries (see page 20). Press the 

illumination button and check if the buttons glow. If they don’t, replace the batteries.

Approx.60

Approx.60

Approx.60

Approx.60