Epson TW100 전단

®

®

Your projector comes with the following items:

Projector

Power cord

Remote control

Batteries

Rubber feet

The projector has 5 connectors, as shown below. Each one is color-coded and requires
a different type of cable (not included). You can connect up to 5 video devices and
use the remote control to switch from one to the other.

Check the connectors on your video equipment. If more than one 
connection is available, choose the one that provides the best quality. 
For example, component video produces higher quality images than 
S-video or composite video. 

Make sure you have the right cable(s) for the connection(s) you want to use,
and the cables are long enough for your setup. If you need a cable longer 
than the standard 6 to 10 feet, you may need a distribution amplifier. 

Before you connect your equipment, make sure everything is turned off.

Connect your video equipment to the projector using any of the available 
connections shown below.

The projector supports 5 viewing setups. Choose the best one for your home theater
environment. If you install the projector in a rear or overhead position, you’ll need 
to choose the correct Projection option (identified below) from the Setting menu
after you turn it on.

Convenient for temporary front projection.

For temporary or permanent installation
on a high shelf. Attach the rubber feet 
and place the projector upside-down.
Choose Front/Ceiling for the Projection
option. 

Professional installation recommended. 
Choose Front/Ceiling for the Projection option.

For permanent installation behind a translucent screen.
Choose Rear for the Projection option.

Professional installation behind a translucent 
screen recommended. Choose Rear/Ceiling
for the Projection option.

The distance between the projector and the screen determines the size of the image.
The diagram below shows approximately how big your image will be, based on
where you set up the projector. 

7.9 inches

Distance from center of lens to bottom edge of screen 

Distance from projector to screen

3-4'

4-5'

6-8'

8-11'

10-14'

20-28'

31-42'

2"

2.6"

4"

5.4"

6.7"

13.5"

20"

Attach the 3 rubber feet

For additional instructions on connecting a computer, see your 
User’s Guide. You can also connect an optional, retractable electric
screen to the Trigger port. The screen will open when you turn on 
the projector, and retract when you turn it off. 

RCA video cable 

(composite video)

Component 

video cable

S-video cable

DVI to DVI cable

or DVI to DFP cable 

or DVI to VGA cable

Component video 

to VGA cable or 

VGA computer cable