Epson EMP-7900 사용자 설명서
101
Monitoring and Controlling Projectors via a Network (for the EMP-7900)
User’s Guide
Network Cable Connections
The projector can be connected to a network using a commercially-
available 100baseTX or 10baseT network cable. You must use a Category
5 shielded twisted-pair cable to connect the network to prevent
malfunction.
available 100baseTX or 10baseT network cable. You must use a Category
5 shielded twisted-pair cable to connect the network to prevent
malfunction.
Projector Connection Settings
When the projector is connected to the network, various settings such as
the
the
must be made using the configuration menus before the
projector can be used.
Use the accessory remote control to carry out these operations.
PROCEDURE
Press the [Menu] button on the remote control and
then select "Network" from the "Advanced2" menu.
then select "Network" from the "Advanced2" menu.
Refer to "Using the Configuration Menus" (
) for details
on using the menus.
To network port
Network cable
(commercially-available)
To Network port
Network connections using the configuration menus
1