Epson EMP-7900 사용자 설명서
152
User’s Guide
Glossary
The following table contains explanations of some of the terms used in this guide which may be unfamiliar or which are not explained in the text of the guide.
Further information can be obtained by referring to other commercially-available publications.
Further information can be obtained by referring to other commercially-available publications.
3-2 pull-down function
This function directly converts image sources that have been recorded in the same 24-frame format used for movies into 60-
frame progressive signals. This allows data such as DVD software that has been recorded in 24-frame format to be played
back on large screens with more natural and accurate reproduction, without any loss of image quality from the original movie.
frame progressive signals. This allows data such as DVD software that has been recorded in 24-frame format to be played
back on large screens with more natural and accurate reproduction, without any loss of image quality from the original movie.
5BNC
A port used to input analogue video signals.
Ad hoc mode
A method of wireless LAN connection that communicates with wireless LAN clients without using an access point.
Aspect ratio
The ratio between an image's length and its height. HDTV images have an aspect ratio of 16:9 and appear elongated. The
aspect ratio for standard images is 4:3.
aspect ratio for standard images is 4:3.
Authentication server
This is a server that centrally manages user authentication. By using an authentication server, management of user information
and user authentication tasks can be centralised. In addition, many authentication servers use high-level authentication
methods and so they also tend to be highly secure.
and user authentication tasks can be centralised. In addition, many authentication servers use high-level authentication
methods and so they also tend to be highly secure.
CCX
Abbreviation for Cisco Compatible Extensions. This is a security technology for wireless LANs developed by Cisco Systems,
Inc. It uses
Inc. It uses
for authentication. Several authentication methods are available for CCX, and this projector uses
authentication.
Channel
Communication speeds will drop if there are too many devices performing wireless communication using the same frequency.
In this case, it is possible to avoid interference from other wireless LANs by setting a wireless channel for each wireless LAN
network.
In this case, it is possible to avoid interference from other wireless LANs by setting a wireless channel for each wireless LAN
network.
Colour temperature
The temperature of an object which is emitting light. If the colour temperature is high, the colours tend to take on a bluish
tinge. If the colour temperature is lower, the colours tend to take on a reddish tinge.
tinge. If the colour temperature is lower, the colours tend to take on a reddish tinge.
Component video
Video signals which have the video brightness signals and colour signals separated, in order to provide better image quality. In
high-definition TV (HDTV), it refers to images which consist of three independent signals: Y (luminance signal), and Pb and
Pr (colour difference signals).
high-definition TV (HDTV), it refers to images which consist of three independent signals: Y (luminance signal), and Pb and
Pr (colour difference signals).
Composite video
Video signals which have the video brightness signals and colour signals mixed together. The type of signals commonly used
by household video equipment (NTSC, PAL and SECAM formats).
The carrier signal Y (luminance signal) and chroma (colour) signal which are contained in the colour bar are overlapped to
form a single signal.
by household video equipment (NTSC, PAL and SECAM formats).
The carrier signal Y (luminance signal) and chroma (colour) signal which are contained in the colour bar are overlapped to
form a single signal.
Contrast
The relative brightness of the light and dark areas of an image can be increased or decreased in order to make text and
graphics stand out more clearly, or to make them appear softer. Adjusting this particular property of an image is called
"contrast adjustment".
graphics stand out more clearly, or to make them appear softer. Adjusting this particular property of an image is called
"contrast adjustment".
Cool-down
This is the process by which the projector's lamp is cooled down after it has become hot through use. It is carried out
automatically when the [Power] button on either the remote control or the projector's control panel has been pressed to turn
the projector off. Do not disconnect the power cord while cool-down is in progress, otherwise the cool-down process will not
work properly. If the cool-down period is not allowed to finish normally, the projector's lamp and internal components will
remain at high temperatures, and this may shorten the operating life of the lamp or cause problems with the operation of the
projector.
automatically when the [Power] button on either the remote control or the projector's control panel has been pressed to turn
the projector off. Do not disconnect the power cord while cool-down is in progress, otherwise the cool-down process will not
work properly. If the cool-down period is not allowed to finish normally, the projector's lamp and internal components will
remain at high temperatures, and this may shorten the operating life of the lamp or cause problems with the operation of the
projector.