Epson EMP-7900 사용자 설명서
156
User’s Guide
List of ESC/VP21 Commands
Command List
When a power on command is sent to the projector, the power will turn on
and the projector will change to warm-up mode. When the power has
turned on, a colon ":" (3Ah) will be returned.
When the projector executes a command, it returns a ":" and waits for the
next command to be sent.
If command processing terminates with an error, the projector outputs an
error message and then returns the ":" code.
and the projector will change to warm-up mode. When the power has
turned on, a colon ":" (3Ah) will be returned.
When the projector executes a command, it returns a ":" and waits for the
next command to be sent.
If command processing terminates with an error, the projector outputs an
error message and then returns the ":" code.
* When issuing any of the above commands, tack a Carriage Return (CR)
code (0Dh) on to the end.
Communication Protocol
Item
Command
Power ON/OFF
ON
PWR ON
OFF
PWR OFF
Signal selection
Computer
SOURCE 10
SOURCE 30
Video
SOURCE 41
S-Video
SOURCE 42
BNC
SOURCE B0
EasyMP (EMP-7950 only)
SOURCE 50
A/V Mute ON/OFF
ON
MUTE ON
OFF
MUTE OFF
A/V Mute Selection
Black
MSEL 00
Blue
MSEL 01
User's Logo
MSEL 02
••••
Standard baud rate
: 9600 bps
••••
Data length
: 8 bits
••••
Parity
: None
••••
Stop bit
: 1 bit
••••
Flow control
: None
••••
Connector shape
: D-Sub 9-pin (male)
••••
Projector input port
: Control (RS-232C)