Epson EMP-7900 사용자 설명서
53
Adjusting the Image Quality
User’s Guide
Adjusting Computer Images
Automatic setup detects analogue RGB signals coming from a connected
computer, and automatically adjusts these signals so that the optimum
images can be obtained.
Automatic setup involves adjustment of the following three items:
computer, and automatically adjusts these signals so that the optimum
images can be obtained.
Automatic setup involves adjustment of the following three items:
, Position and
.
Automatic Setup
TIP
• If "Auto Setup" in the "Advanced2" menu is set to "OFF" (the
default setting for this command is "ON"), automatic setup is not
carried out. If you press the [Auto] button on the remote control or
the [Auto/Enter] button on the projector's control panel while
computer images (analogue RGB signals) are being projected,
adjustment will then be carried out.
carried out. If you press the [Auto] button on the remote control or
the [Auto/Enter] button on the projector's control panel while
computer images (analogue RGB signals) are being projected,
adjustment will then be carried out.
• If you press the [Auto] button on the remote control or the [Auto/
Enter] button on the projector's control panel while the E-Zoom
function or Freeze function is active, the active function will be
cancelled and then the adjustment will be carried out.
function or Freeze function is active, the active function will be
cancelled and then the adjustment will be carried out.
• Sometimes the signals may not be adjusted correctly depending on
the type of signals being output by the computer. In such cases, use
the "Tracking", "Position" and "Sync." menu commands to make
the adjustments manually.
the "Tracking", "Position" and "Sync." menu commands to make
the adjustments manually.
,
• Automatic setup is not carried out while the preview function is
being used.
Remote control