Epson S1 사용자 설명서
25
Adjusting the Display
Adjusting the Display
Adjusting the projection size
The size of the projected image is basically determined by the distance from
the projector to the screen. See
the projector to the screen. See
1
Press the [Wide] or [Tele] buttons on the control panel to adjust
the projection size.
the projection size.
[Wide]: increase the size
[Tele]: reduces the size
The image can be enlarged in this way to 1.2 times the normal size.
If you would like to enlarge the image further, move the projector
further away from the screen.
further away from the screen.
Setting the focus
Turn the focus ring to adjust the image focus.
p
• The default setting is wide.
• The E-Zoom function lets you enlarge parts of the image.
• The E-Zoom function lets you enlarge parts of the image.
p
• If the surface of the lens is dirty, or misted over as a result of
condensation, it may not be possible to adjust the focus correctly. If
this happens, clean or de-mist the lens. See
this happens, clean or de-mist the lens. See
• If the projector is positioned outside the normal projecting range of
2.9-36.4 feet (87-1109 cm), it may not be possible to obtain the
correct focus. If you have trouble obtaining the correct focus, check
the projection distance.
correct focus. If you have trouble obtaining the correct focus, check
the projection distance.