Epson S1 사용자 설명서

First, check the indicators on the projector. There are two indicators on the projector unit which notify you of projector conditions.

lit  

flashing

•

If the indicator is not lit, the power supply is not on.

Power indicator

Warning indicator

s

The power cable should only be disconnected when the projector is in this state.

Press the [Power] button to start projection.

• Please wait. The cool-down period lasts about 20 seconds.

• You cannot operate the [Power] button during the cool-down period. Press the power button again after cool-down has 

finished.

Please wait. Warming up takes about 35 seconds (the EPSON logo appears after approximately 6 seconds). When warming 
up is complete, the indicator changes to steady green.