Epson 5600p 사용자 설명서

Depending on how you plan to use the projector, you may need 
additional components:

■

To receive an S-Video signal, you need an S-Video cable. (One is 
usually provided with your video device.)

■

To receive a component video signal from a VCR or other video 
device having BNC connectors, you need a VGA-to-3BNC cable. 
You can purchase this from EPSON; see page 8. 

■

To connect two computers to the projector at the same time, you 
need an additional VGA computer cable like the one included 
with the projector. To amplify the second computer’s audio 
through the projector’s sound system, you need an 
RCA-to-3.5 mm stereo cable. See your computer or electronics 
dealer to obtain these cables.

■

Some older PowerBooks and Macintosh desktop models may 
need the Macintosh adapter set shown on page 83 (available from 
EPSON; see page 8). Older iMac systems may need a special 
adapter to provide a VGA output port; see your computer dealer. 

■

Some systems may need an additional cable to use the remote 
control as a wireless mouse. If your Macintosh doesn’t have a USB 
port, you’ll need a Macintosh mouse cable. If your PC doesn’t 
have a USB or PS/2 port, you’ll need a PC serial mouse cable. See 
your projector dealer to obtain the correct cable.

■

If you plan to use the EMP Link V software to control the 
projector, you’ll need a standard serial cable, which you may 
purchase from your computer dealer.

■

To take advantage of the projector’s Digital Visual Interface, you 
need a DVI cable, and your computer must be capable of 
producing video signals in DVI format (for details, see page 88). 
You can purchase this cable from EPSON; see page 8.

5600 and 7600.book  Page 7  Thursday, December 14, 2000  2:46 PM