Epson 5600p 사용자 설명서
Setting Up the Projector
17
Connecting an S-Video Cable
If your video source has an S-Video jack, you can use it to project a
higher quality video image. However, you’ll need an S-Video cable,
which may be included with your video source, or can be purchased
separately.
higher quality video image. However, you’ll need an S-Video cable,
which may be included with your video source, or can be purchased
separately.
Before starting, make sure the projector and your DVD player or
other video source are turned off.
other video source are turned off.
1. Insert one end of an S-Video cable into the projector’s
S-Video
connector.
2. Insert the other end into the S-Video output port of your video
source.
To include sound in your presentation, connect the RCA audio cable
as described on page 19.
as described on page 19.
S-Video cable
S-Video connector
5600 and 7600.book Page 17 Thursday, December 14, 2000 2:46 PM