Epson 5600p 사용자 설명서

If the image is too low, you can raise it by extending the projector’s 
feet. 

1. Stand behind the projector. Pull up the blue foot release levers 

and lift the front of the projector. This unlocks the feet.

2. Once the image is positioned where you want it, release the levers 

to lock the feet in position.

3. To fine-tune the height of the image, rotate the thumb wheels 

attached to the projector’s feet.

If the image is no longer square after raising it, see the next section.

If the projected image isn’t square or has a “keystone” shape, do one or 
more of the following:

■

If your image looks like 

 or 

, you’ve placed the 

projector off to one side of the screen, at an angle. Move it directly 
in front of the center of the screen, facing the screen squarely.

■

If your image looks like 

 or 

, press the 

+

 or 

—

 side of 

the 

Keystone

 button to correct the shape of the image. After 

correction, your image will be slightly smaller.

You can also perform electronic keystone correction using the 
projector’s Setting menu. See page 53.

5600 and 7600.book  Page 27  Thursday, December 14, 2000  2:46 PM