Epson 5600p 사용자 설명서

our projector needs little maintenance. All you need to do on a 

regular basis is keep the lens clean. Any dirt or smears on the lens may 
show up on your projected image. 

You also need to periodically clean the air filter on the bottom of the 
projector. A clogged air filter can block ventilation needed to cool the 
projector and keep it from overheating. 

The only parts you should replace are the lamp and air filter. If any 
other part needs replacing, contact your dealer or a qualified service 
person.

This chapter covers the following:

■

Cleaning the lens

■

Cleaning the projector case

■

Cleaning and replacing the air filter

■

Replacing the lamp

■

Transporting the projector

Before you clean any part of 
the projector, turn it off and 
unplug the power cord. Never 
open any cover on the 
projector, except the lamp 
and filter covers. Dangerous 
electrical voltages in the 
projector can injure you 
severely. Do not try to service 
this product yourself, except 
as specifically explained in 
this User’s Guide. Refer all 
other servicing to qualified 
service personnel.

5600 and 7600.book  Page 57  Thursday, December 14, 2000  2:46 PM