Epson 5600p 사용자 설명서

You can connect the projector to any IBM-compatible PC. This 
section includes instructions for the following:

■

Connecting the computer cable 

■

Connecting the mouse cable (if you want to use the remote 
control as a mouse)

■

Connecting the audio cable (if you’ll be projecting with audio)

Follow the steps in each section for the cables you need to connect. 
Before beginning, make sure the projector and computer are turned 
off. If you need help with positioning the projector, see page 10.

1. Disconnect the monitor cable from the video port on the back of 

the computer and set it aside. (You won’t be able to use the 
monitor while the projector is connected.)

2. Connect one end of the computer cable to the projector’s 

Computer 1

 (analog) port, as shown.

3. Connect the other end of the cable to the computer’s video port.

4. Tighten the screws on the connectors.

computer cable

Computer 1 port

5600 and 7600.book  Page 80  Thursday, December 14, 2000  2:46 PM